This is Info file ../info/reftex, produced by Makeinfo version 1.68 from the input file reftex.texi. INFO-DIR-SECTION Editors START-INFO-DIR-ENTRY * reftex: (reftex). Support for LaTeX labels, references, and citations with Emacs. END-INFO-DIR-ENTRY This file documents RefTeX, a package to do labels, references and citations for LaTeX documents with Emacs. This is edition 3.43 of the RefTeX User Manual for RefTeX 3.43 Copyright (c) 1997, 1998 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derive work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation.  File: reftex, Node: Top, Up: (dir) RefTeX is a package for managing Labels, References and Citations with GNU Emacs. Don't be discouraged by the size of this manual, which covers RefTeX in great depth. All you need to know to use RefTeX can be summarized on a single page (*note RefTeX in a Nutshell::.). You can go back later to other parts of this document when needed. * Menu: * Introduction:: Quick-Start information. * Table of Contents:: A Tool to move around quickly. * Labels and References:: Creating and referencing labels. * Citations:: Creating Citations. * Viewing Cross-References:: Who references or cites what? * RefTeXs Menu:: The Ref menu in the menubar. * Keybindings:: The default keybindings. * Faces:: Fontification of RefTeX's buffers. * Multifile Documents:: Document spread over many files. * Language Support:: How to support other languages. * Finding Files:: Included TeX files and BibTeX .bib files. * AUCTeX:: Cooperation with AUCTeX. * Optimizations:: When RefTeX is too slow. * Problems and Work-Arounds:: First Aid. * Imprint:: Author, Web-site, Thanks * Commands:: Which are the available commands. * Options:: How to extend and configure RefTeX. * Keymaps and Hooks:: For customization. * Changes:: A List of recent changes to RefTeX. The Index * Index:: The full index. Introduction * Installation:: How to install and activate RefTeX. * RefTeX in a Nutshell:: A brief summary and quick guide. Labels and References * Creating Labels:: * Referencing Labels:: * Builtin Label Environments:: The environments RefTeX knows about. * Defining Label Environments:: ... and environments it doesn't. * Reference Info:: View the label corresponding to a \ref. * xr (LaTeX package):: References to external documents. * varioref (LaTeX package):: How to create \vref instead of \ref. Defining Label Environments * Theorem and Axiom:: Defined with `\newenvironment'. * Quick Equation:: When a macro sets the label type. * Figure Wrapper:: When a macro argument is a label. * Adding Magic Words:: Other words for other languages. * Using \eqref:: How to switch to this AMS-LaTeX macro. * Putting it Together:: How to combine many entries. Citations * Creating Citations:: How to create them. * Citation Styles:: Natbib, Harvard, Chicago and CO. * Citation Info:: View the corresponding database entry. * Chapterbib and Bibunits:: Multiple bibliographies in a Document. * Citations Outside LaTeX:: How to make citations in Emails etc. AUCTeX * AUCTeX-RefTeX Interface:: How both packages work together * Style Files:: AUCTeX's style files can support RefTeX * Bib-Cite:: Hypertext reading of a document Options, Keymaps, Hooks * Options (Table of Contents):: * Options (Defining Label Environments):: * Options (Creating Labels):: * Options (Referencing Labels):: * Options (Creating Citations):: * Options (Viewing Cross-References):: * Options (Finding Files):: * Options (Optimizations):: * Options (Fontification):: * Options (Misc)::  File: reftex, Node: Introduction, Next: Table of Contents, Up: Top Introduction ************ RefTeX is a specialized package for support of labels, references, and citations in LaTeX. RefTeX wraps itself round 3 LaTeX macros: `\label', `\ref', and `\cite'. Using these macros usually requires looking up different parts of the document and searching through BibTeX database files. RefTeX automates these time-consuming tasks almost entirely. It also provides functions to display the structure of a document and to move around in this structure quickly. *Note Imprint::, for information about who to contact for help, bug reports or suggestions. * Menu: * Installation:: How to install and activate RefTeX. * RefTeX in a Nutshell:: A brief summary and quick guide.  File: reftex, Node: Installation, Next: RefTeX in a Nutshell, Up: Introduction Installation ============ RefTeX is bundled and pre-installed with Emacs since version 20.2. Users of earlier Emacs distributions (including Emacs 19) can get a copy of the RefTeX distribution from the maintainers web-page. *Note Imprint::, for more information. Environment =========== RefTeX needs to access all files which are part of a multifile document, and the BibTeX database files requested by the `\bibliography' command. To find these files, RefTeX will require a search path, i.e., a list of directories to check. Normally this list is stored in the environment variables `TEXINPUTS' and `BIBINPUTS' which are also used by RefTeX. However, on some systems these variables do not contain the full search path. If RefTeX does not work for you because it cannot find some files, read *Note Finding Files::. Entering RefTeX Mode ==================== To turn RefTeX Mode on and off in a particular buffer, use `M-x reftex-mode'. To turn on RefTeX Mode for all LaTeX files, add the following lines to your `.emacs' file: (add-hook 'LaTeX-mode-hook 'turn-on-reftex) ; with AUCTeX LaTeX mode (add-hook 'latex-mode-hook 'turn-on-reftex) ; with Emacs latex mode  File: reftex, Node: RefTeX in a Nutshell, Prev: Installation, Up: Introduction RefTeX in a Nutshell ==================== 1. Table of Contents Typing `C-c =' (`reftex-toc') will show a table of contents of the document. From that buffer, you can jump quickly to every part of your document. Press `?' to get help. 2. Labels and References RefTeX distinguishes labels for different environments. It knows about all standard environments (and many others), and can be configured to recognize any additional labeled environments you have defined yourself (variable `reftex-label-alist'). Creating Labels Type `C-c (' (`reftex-label') to insert a label at point. RefTeX will either - derive a label from context (default for section labels) - prompt for a label string (default for figures and tables) or - insert a simple label made of a prefix and a number (all other environments) This is configurable with the variable `reftex-insert-label-flags'. Referencing Labels To make a reference, type `C-c )' (`reftex-reference'). This shows an outline of the document with all labels of a certain type (figure, equation,...) and some label context. Selecting a label inserts a `\ref{LABEL}' macro into the original buffer. 3. Citations Typing `C-c [' (`reftex-citation') will let you specify a regular expression to search in current BibTeX database files (as specified in the `\bibliography' command) and pull out a list of matches for you to choose from. The list is *formatted* and sorted. The selected article is referenced as `\cite{KEY}' (see variable `reftex-cite-format'). 4. Viewing Cross-References When point is on the KEY argument of a cross-referencing macro (`\label', `\ref', `\cite', `\bibitem', `\index', and variations) or inside a BibTeX database entry, you can press `C-c &' (`reftex-view-crossref') to display corresponding locations in the document and associated BibTeX database files. When the enclosing macro is `\cite' or `\ref' and no other message occupies the echo area, information about the citation or label will automatically be displayed. 5. Multifile Documents Multifile Documents are fully supported. RefTeX provides cross-referencing information from all parts of the document, and across document borders (`xr.sty'). 6. Document Parsing RefTeX needs to parse the document in order to find labels and other information. It does it automatically once and updates its list internally when `reftex-label' is used. To enforce reparsing, call any of the commands described above with a raw `C-u' prefix, or press the `r' key in the label selection buffer or the table of contents buffer. 7. Useful Settings To make RefTeX faster for large documents, and to integrate with AUCTeX, try these: (setq reftex-enable-partial-scans t) (setq reftex-save-parse-info t) (setq reftex-use-multiple-selection-buffers t) (setq reftex-plug-into-AUCTeX t)  File: reftex, Node: Table of Contents, Next: Labels and References, Prev: Introduction, Up: Top Table of Contents ***************** Pressing the keys `C-c =' pops up a buffer showing the table of contents of the document. By default, this `*toc*' buffer shows only the sections of a document. Using the `l' and `c' keys you can have all labels defined in the document and some context of the label definition displayed as well. With the cursor in any of the lines denoting a location in the document, simple key strokes will display the corresponding part in another window, jump to that location, or perform other actions. Here is a list of special commands in the `*toc*' buffer. A summary of this information is always available by pressing `?'. `0-9, -' Prefix argument. `c' Toggle the display of label context in the `*toc*' buffer. The default for this flag can be set with the variable `reftex-toc-include-context'. `f' Toggle follow mode. When follow mode is active, the other window will always show the location corresponding to the line in the `*toc*' buffer at point. This is similar to pressing after each cursor motion. The default for this flag can be set with the variable `reftex-toc-follow-mode'. Note that only context in files already visited is shown. RefTeX will not visit a file just for follow mode. See, however, the variable `reftex-revisit-to-follow'. `g' Rebuild the `*toc*' buffer. This does *not* rescan the document. `i' Toggle the display of the file borders of a multifile document in the `*toc*' buffer. The default for this flag can be set with the variable `reftex-toc-include-file-boundaries'. `l' Toggle the display of labels `*toc*' buffer. The default for this flag can be set with the variable `reftex-toc-include-labels'. `n' Goto next entry in the table of context. `p' Goto previous entry in the table of context. `q' Hide the `*toc*' buffer, return to the position where `reftex-toc' was last called. `Q' Kill the `*toc*' buffer, return to the position where `reftex-toc' was last called. `r' Reparse the LaTeX document and rebuild the `*toc*' buffer. When `reftex-enable-partial-scans' is non-nil, rescan only the file this location is defined in, not the entire document. `R' Reparse the *entire* LaTeX document and rebuild the `*toc*' buffer. `x' Switch to the `*toc*' buffer of an external document. When the current document is using the `xr' package (*note xr (LaTeX package)::.), RefTeX will switch to one of the external documents. `.' Show calling point in another window. This is the point from where `reftex-toc' was last called. `' Show the corresponding location in another window. This command does *not* select that other window. `' Goto the location in another window. `' Go to the location and hide the `*toc*' buffer. This will restore the window configuration before `reftex-toc' (`C-c =') was called. `mouse-2' Clicking with mouse button 2 on a line has the same effect as . See also variable `reftex-highlight-selection', *Note Options (Fontification)::. In order to define additional commands for the `*toc*' buffer, the keymap `reftex-toc-map' may be used. The section macros recognized by RefTeX are all LaTeX section macros (from `\part' to `\subsubparagraph') and the commands `\addchap' and `\addsec' from the KOMA-Script classes. Additional macros can be configured with the variable `reftex-section-levels'.  File: reftex, Node: Labels and References, Next: Citations, Prev: Table of Contents, Up: Top Labels and References ********************* LaTeX provides a powerful mechanism to deal with cross-references in a document. When writing a document, any part of it can be marked with a label, like `\label{mark}'. LaTeX records the current value of a certain counter when a label is defined. Later references to this label (like `\ref{mark}') will produce the recorded value of the counter. Labels can be used to mark sections, figures, tables, equations, footnotes, items in enumerate lists etc. LaTeX is context sensitive in doing this: A label defined in a figure environment automatically records the figure counter, not the section counter. Several different environments can share a common counter and therefore a common label category. E.g. labels in both `equation' and `eqnarray' environments record the value of the same counter--the equation counter. * Menu: * Creating Labels:: * Referencing Labels:: * Builtin Label Environments:: The environments RefTeX knows about. * Defining Label Environments:: ... and environments it doesn't. * Reference Info:: View the label corresponding to a \ref. * xr (LaTeX package):: References to external documents. * varioref (LaTeX package):: How to create \vref instead of \ref.  File: reftex, Node: Creating Labels, Next: Referencing Labels, Up: Labels and References Creating Labels =============== In order to create a label in a LaTeX document, press `C-c (' (`reftex-label'). Just like LaTeX, RefTeX is context sensitive and will figure out the environment it currently is in and adapt the label to that environment. A label usually consists of a short prefix indicating the type of the label and a unique mark. RefTeX has 3 different modes to create this mark. 1. A label can be derived from context. This means, RefTeX takes the context of the label definition and constructs a label from that(1). This works best for section labels, where the section heading is used to construct a label. In fact, RefTeX's default settings use this method only for section labels. You will be asked to confirm the derived label, or edit it. 2. We may also use a simple unique number to identify a label. This is mostly useful for labels where it is difficult to come up with a very good descriptive name. RefTeX's default settings use this method for equations, enumerate items and footnotes. The author of RefTeX tends to write documents with many equations and finds it impossible to come up with good names for each of them. These simple labels are inserted without query, and are therefore very fast. Good descriptive names are not really necessary as RefTeX will provide context to reference a label (*note Referencing Labels::.). 3. The third method is to ask the user for a label. This is most useful for things which are easy to describe briefly and do not turn up too frequently in a document. RefTeX uses this for figures and tables. Of course, one can enter the label directly by typing the full `\label{mark}'. The advantage of using `reftex-label' anyway is that RefTeX will know that a new label has been defined. It will then not be necessary to rescan the document in order to access this label later. If you want to change the way certain labels are created, check out the variable `reftex-insert-label-flags' (*note Options (Creating Labels)::.). If you are using AUCTeX to write your LaTeX documents, you can set it up to delegate the creation of labels to RefTeX. *Note AUCTeX::, for more information. ---------- Footnotes ---------- (1) Note that the context may contain constructs which are illegal in labels. RefTeX will therefore strip the accent from accented Latin-1 characters and remove everything else which is not legal in labels. This mechanism is safe, but may not be satisfactory for non-western languages. Check the following variables if you need to change things: `reftex-translate-to-ascii-function', `reftex-derive-label-parameters', `reftex-label-illegal-re', `reftex-abbrev-parameters'.  File: reftex, Node: Referencing Labels, Next: Builtin Label Environments, Prev: Creating Labels, Up: Labels and References Referencing Labels ================== Referencing Labels is really at the heart of RefTeX. Press `C-c )' in order to reference a label (reftex-reference). This will start a selection process and finally insert the complete `\ref{label}' into the buffer. First, RefTeX will determine the label category which is required. Often that can be figured out from context. For example, if you write `As shown in eq.' and the press `C-c )', RefTeX knows that an equation label is going to be referenced. If it cannot figure out what label category is needed, it will query for one. You will then be presented with a label selection menu. This is a special buffer which contains an outline of the document along with all labels of the given label category. In addition, next to the label there will be one line of context of the label definition, which is some text in the buffer near the label definition. Usually this is sufficient to identify the label. If you are unsure about a certain label, pressing will show the label definition point in another window. In order to reference a label, move to cursor to the correct label and press . Here is a list of special commands in the selection buffer. A summary of this information is always available from the selection process by pressing `?'. `0-9,-' Prefix argument. `b' Jump back to the position where you last left the selection buffer. Normally this should get you back to the last referenced label. `c' Toggle the display of the one-line label definition context in the selection buffer. `f' Toggle follow mode. When follow mode is active, the other window will always display the full context of the current label. This is similar to pressing after each cursor motion. Note that only context in files already visited is shown. RefTeX will not visit a file just for follow mode. See, however, the variable `reftex-revisit-to-follow'. `g' Update the menu. This will rebuilt the menu from the internal label list, but not reparse the document (see `r'). `i' Toggle the display of the file borders of a multifile document in the selection buffer. `l' Use the last referenced label again. This is equivalent to moving to that label and pressing . `n' Go to next label. `p' Go to previous label. `q' Exit the selection process without inserting any reference into the buffer. `r' Reparse the document to update the information on all labels and rebuild the menu. If the variable `reftex-enable-partial-scans' is non-`nil' and your document is a multifile document, this will reparse only a part of the document (the file in which the label at point was defined). `R' Reparse the *entire* document. `s' Switch the label category. After prompting for another label category, a menu for that category will be shown. `t' Toggle the display of the table of contents in the selection buffer. `v' Toggle between `\ref' and `\vref' macro for references. The `\vref' macro is defined in the `varioref' LaTeX package. With this key you can force RefTeX to insert a `\vref' macro. The current state of this flag is displayed in the mode line of the selection buffer. `x' Reference a label from an external document. With the LaTeX package `xr' it is possible to reference labels defined in another document. This key will switch to the label menu of an external document and let you select a label from there (*note xr: xr (LaTeX package).). `.' Show insertion point in another window. This is the point from where you called `reftex-reference'. `' Enter a label with completion. This may also be a label which does not yet exist in the document. `' Show the surroundings of the definition of the current label in another window. See also the `f' key. `' Insert a reference to the label at point into the buffer from which the selection process was started. `mouse-2' Clicking with mouse button 2 on a label will accept it like would. See also variable `reftex-highlight-selection', *Note Options (Misc)::. `#' Toggle the display of a label counter in the selection buffer. `%' Toggle the display of labels hidden in comments in the selection buffers. Sometimes, you may have commented out parts of your document. If these parts contain label definitions, RefTeX can still display and reference these labels. `?' Show a summary of the available keys. `C-c C-n' Goto next section heading (like outline mode). `C-c C-p' Goto previous section heading (like outline mode). Several of these keys toggle certain settings. The default value for these flags can be preset by configuring the variable `reftex-label-menu-flags' (*note Options (Referencing Labels)::.). In order to define additional commands for the selection process, the keymap `reftex-select-label-map' may be used.  File: reftex, Node: Builtin Label Environments, Next: Defining Label Environments, Prev: Referencing Labels, Up: Labels and References Builtin Label Environments ========================== RefTeX needs to be aware of the environments which can be referenced with a label (i.e. which carry their own counters). By default, RefTeX recognizes all labeled environments and macros discussed in `The LaTeX Companion by Goossens, Mittelbach & Samarin, Addison-Wesley 1994.'. These are: - `figure', `figure*', `table', `table*', `equation', `eqnarray', `enumerate', the `\footnote' macro (this is the LaTeX core stuff) - `align', `gather', `multline', `flalign', `alignat', `xalignat', `xxalignat', `subequations' (from AMS-LaTeX's `amsmath.sty' package) - the `\endnote' macro (from `endnotes.sty') - `Beqnarray' (`fancybox.sty') - `floatingfig' (`floatfig.sty') - `longtable' (`longtable.sty') - `figwindow', `tabwindow' (`picinpar.sty') - `SCfigure', `SCtable' (`sidecap.sty') - `sidewaysfigure', `sidewaystable' (`rotating.sty') - `subfigure', `subfigure*', the `\subfigure' macro (`subfigure.sty') - `supertabular' (`supertab.sty') - `wrapfigure' (`wrapfig.sty') If you want to use other labeled environments, defined with `\newtheorem', RefTeX needs to be configured to recognize them (*note Defining Label Environments::.).  File: reftex, Node: Defining Label Environments, Next: Reference Info, Prev: Builtin Label Environments, Up: Labels and References Defining Label Environments =========================== RefTeX can be configured to recognize additional labeled environments and macros. This is done with the variable `reftex-label-alist' (*note Options (Defining Label Environments)::.). If you are not familiar with Lisp, you should use the `custom' library to configure this rather complex variable. To do this, use M-x customize-variable reftex-label-alist Here we will discuss a few examples, in order to make things clearer. It can also be instructive to look at the constant `reftex-label-alist-builtin' which contains the entries for all the builtin environments and macros (*note Builtin Label Environments::.). * Menu: * Theorem and Axiom:: Defined with `\newenvironment'. * Quick Equation:: When a macro sets the label type. * Figure Wrapper:: When a macro argument is a label. * Adding Magic Words:: Other words for other languages. * Using \eqref:: How to switch to this AMS-LaTeX macro. * Putting it Together:: How to combine many entries.  File: reftex, Node: Theorem and Axiom, Next: Quick Equation, Up: Defining Label Environments Theorem and Axiom Environments ------------------------------ Suppose you are using `\newtheorem' in LaTeX in order to define two new environments, `theorem' and `axiom' \newtheorem{axiom}{Axiom} \newtheorem{theorem}{Theorem} to be used like this: \begin{axiom} \label{ax:first} .... \end{axiom} So we need to tell RefTeX that `theorem' and `axiom' are new labeled environments which define their own label categories. We can either use Lisp to do this (e.g. in `.emacs') or use the custom library. With Lisp it would look like this (setq reftex-label-alist '(("axiom" ?a "ax:" "~\\ref{%s}" nil ("axiom" "ax.")) ("theorem" ?h "thr:" "~\\ref{%s}" t ("theorem" "theor." "th.")))) The type indicator characters `?a' and `?h' are used for prompts when RefTeX queries for a label type. `?h' was chosen for `theorem' since `?t' is already taken by `table'. Note that also `?s', `?f', `?e', `?i', `?n' are already used for standard environments. The labels for Axioms and Theorems will have the prefixes `ax:' and `thr:', respectively. *Note AUCTeX::, for information on how AUCTeX can use RefTeX to automatically create labels when a new environment is inserted into a buffer. The `~\ref{%s}' is a format string indicating how to insert references to these labels. The next item indicates how to grab context of the label definition. - `t' means to get it from a default location (from the beginning of a `\macro' or after the `\begin' statement). `t' is *not* a good choice for eqnarray and similar environments. - `nil' means to use the text right after the label definition. - For more complex ways of getting context, see the variable `reftex-label-alist' (*note Options (Defining Label Environments)::.). The strings at the end of each entry are used to guess the correct label type from the word before point when creating a reference. E.g. if you write: `As we have shown in Theorem' and then press `C-c )', RefTeX will know that you are looking for a theorem label and restrict the menu to only these labels without even asking. To do the same configuration with `customize', you need to click on the `[INS]' button twice to create two templates and fill them in like this: Reftex Label Alist: [Hide] [INS] [DEL] Package or Detailed : [Value Menu] Detailed: Environment or \macro : [Value Menu] String: axiom Type specification : [Value Menu] Char : a Label prefix string : [Value Menu] String: ax: Label reference format: [Value Menu] String: ~\ref{%s} Context method : [Value Menu] After label Magic words: [INS] [DEL] String: axiom [INS] [DEL] String: ax. [INS] [INS] [DEL] Package or Detailed : [Value Menu] Detailed: Environment or \macro : [Value Menu] String: theorem Type specification : [Value Menu] Char : h Label prefix string : [Value Menu] String: thr: Label reference format: [Value Menu] String: ~\ref{%s} Context method : [Value Menu] Default position Magic words: [INS] [DEL] String: theorem [INS] [DEL] String: theor. [INS] [DEL] String: th. [INS] Depending on how you would like the label insertion and selection for the new environments to work, you might want to add the letters `a' and `h' to some of the flags in the variables `reftex-insert-label-flags' (*note Options (Creating Labels)::.) and `reftex-label-menu-flags' (*note Options (Referencing Labels)::.).  File: reftex, Node: Quick Equation, Next: Figure Wrapper, Prev: Theorem and Axiom, Up: Defining Label Environments Quick Equation Macro -------------------- Suppose you would like to have a macro for quick equations. It could be defined like this: \newcommand{\quickeq}[1]{\begin{equation} #1 \end{equation}} and used like this: Einstein's equation is \quickeq{E=mc^2 \label{eq:einstein}}. We need to tell RefTeX that any label defined in the argument of the `\quickeq' is an equation label. Here is how to do this with lisp: (setq reftex-label-alist '(("\\quickeq{}" ?e nil nil 1 nil))) The first element in this list is now the macro with empty braces as an *image* of the macro arguments. `?e' indicates that this is an equation label, the different `nil' elements indicate to use the default values for equations. The `1' as the fifth element indicates that the context of the label definition should be the 1st argument of the macro. Here is again how this would look in the customization buffer: Reftex Label Alist: [Hide] [INS] [DEL] Package or Detailed : [Value Menu] Detailed: Environment or \macro : [Value Menu] String: \quickeq{} Type specification : [Value Menu] Char : e Label prefix string : [Value Menu] Default Label reference format: [Value Menu] Default Context method : [Value Menu] Macro arg nr: 1 Magic words: [INS]  File: reftex, Node: Figure Wrapper, Next: Adding Magic Words, Prev: Quick Equation, Up: Defining Label Environments Figure Wrapping Macro --------------------- Suppose you want to make figures not directly with the figure environment, but with a macro like \newcommand{\myfig}[5][tbp]{% \begin{figure}[#1] \epsimp[#5]{#2} \caption{#3} \label{#4} \end{figure}} which would be called like \myfig[htp]{filename}{caption text}{label}{1} Now we need to tell RefTeX that the 4th argument of the `\myfig' macro *is itself* a figure label, and where to find the context. (setq reftex-label-alist '(("\\myfig[]{}{}{*}{}" ?f nil nil 3))) The empty pairs of brackets indicate the different arguments of the `\myfig' macro. The `*' marks the label argument. `?f' indicates that this is a figure label which will be listed together with labels from normal figure environments. The `nil' entries for prefix and reference format mean to use the defaults for figure labels. The `3' for the context method means to grab the 3rd macro argument - the caption. As a side effect of this configuration, `reftex-label' will now insert the required naked label (without the `\label' macro) when point is directly after the opening parenthesis of a `\myfig' macro argument. Again, here the configuration in the customization buffer: [INS] [DEL] Package or Detailed : [Value Menu] Detailed: Environment or \macro : [Value Menu] String: \myfig[]{}{}{*}{} Type specification : [Value Menu] Char : f Label prefix string : [Value Menu] Default Label reference format: [Value Menu] Default Context method : [Value Menu] Macro arg nr: 3 Magic words: [INS]  File: reftex, Node: Adding Magic Words, Next: Using \eqref, Prev: Figure Wrapper, Up: Defining Label Environments Adding Magic Words ------------------ Sometimes you don't want to define a new label environment or macro, but just change the information associated with a label category. Maybe you want to add some magic words, for another language. Changing only the information associated with a label category is done by giving `nil' for the environment name and then specify the items you want to define. Here is an example which adds German magic words to all predefined label categories. (setq reftex-label-alist '((nil ?s nil nil nil ("Kapitel" "Kap." "Abschnitt" "Teil")) (nil ?e nil nil nil ("Gleichung" "Gl.")) (nil ?t nil nil nil ("Tabelle")) (nil ?f nil nil nil ("Figur" "Abbildung" "Abb.")) (nil ?n nil nil nil ("Anmerkung" "Anm.")) (nil ?i nil nil nil ("Punkt"))))  File: reftex, Node: Using \eqref, Next: Putting it Together, Prev: Adding Magic Words, Up: Defining Label Environments Using `\eqref' -------------- Another case where one only wants to change the information associated with the label category is to change the macro which is used for referencing the label. When working with the AMS-LaTeX stuff, you might prefer `\eqref' for doing equation references. Here is how to do this: (setq reftex-label-alist '((nil ?e nil "~\\eqref{%s}" nil nil))) RefTeX has also a predefined symbol for this special purpose. The following is equivalent to the line above. (setq reftex-label-alist '(AMSTeX)) Note that this is automatically done by the `amsmath.el' style file of AUCTeX (*note Style Files::.)--so if you use AUCTeX, this configuration will not be necessary.  File: reftex, Node: Putting it Together, Prev: Using \eqref, Up: Defining Label Environments Putting it all together ----------------------- When you have to put several entries into `reftex-label-alist', just put them after each other in a list, or create that many templates in the customization buffer. Here is a lisp example which uses several of the entries described above: (setq reftex-label-alist '(("axiom" ?a "ax:" "~\\ref{%s}" nil ("axiom" "ax.")) ("theorem" ?h "thr:" "~\\ref{%s}" t ("theorem" "theor." "th.")) ("\\quickeq{}" ?e nil nil 1 nil) AMSTeX ("\\myfig[]{}{}{*}{}" ?f nil nil 3)))  File: reftex, Node: Reference Info, Next: xr (LaTeX package), Prev: Defining Label Environments, Up: Labels and References Reference Info ============== When point is idle on the argument of a `\ref' macro, the echo area will display some information about the label referenced there. Note that the information is only displayed if the echo area is not occupied by a different message. RefTeX can also display the label definition corresponding to a `\ref' macro, or all reference locations corresponding to a `\label' macro. *Note Viewing Cross-References::, for more information.  File: reftex, Node: xr (LaTeX package), Next: varioref (LaTeX package), Prev: Reference Info, Up: Labels and References `xr': Cross-Document References =============================== The LaTeX package `xr' makes it possible to create references to labels defined in external documents. The preamble of a document using `xr' will contain something like this: \usepackage{xr} \externaldocument[V1-]{volume1} \externaldocument[V3-]{volume3} and we can make references to any labels defined in these external documents by using the prefixes `V1-' and `V3-', respectively. RefTeX can be used to create such references as well. Start the referencing process normally, by pressing `C-c )'. Select a label type if necessary. When you see the label selection buffer, pressing `x' will switch to the label selection buffer of one of the external documents. You may then select a label as before and RefTeX will insert it along with the required prefix. For this kind of inter-document cross-references, saving of parsing information and the use of multiple selection buffers can mean a large speed-up (*note Optimizations::.).  File: reftex, Node: varioref (LaTeX package), Prev: xr (LaTeX package), Up: Labels and References `varioref': Variable Page References ==================================== `varioref' is a frequently used LaTeX package to create cross-references with page information. When you want to make a reference with the `\vref' macro, just press the `v' key in the selection buffer to toggle between the `\ref' and `\vref' (*note Referencing Labels::.). The mode line of the selection buffer shows the current status of this switch. If you find that you almost always use `\vref', you may want to make it the default by customizing the variable `reftex-vref-is-default'.  File: reftex, Node: Citations, Next: Viewing Cross-References, Prev: Labels and References, Up: Top Citations ********* Citations in LaTeX are done with the `\cite' macro or variations of it. The argument of the macro is a citation key which identifies an article or book in either a BibTeX database file or in an explicit `thebibliography' environment in the document. RefTeX's support for citations helps to select the correct key quickly. * Menu: * Creating Citations:: How to create them. * Citation Styles:: Natbib, Harvard, Chicago and CO. * Citation Info:: View the corresponding database entry. * Chapterbib and Bibunits:: Multiple bibliographies in a Document. * Citations Outside LaTeX:: How to make citations in Emails etc.  File: reftex, Node: Creating Citations, Next: Citation Styles, Up: Citations Creating Citations ================== In order to create a citation, press `C-c ['. RefTeX then prompts for a regular expression which will be used to search through the database and present the list of matches to choose from in a selection process similar to that for selecting labels (*note Referencing Labels::.). The regular expression uses an extended syntax: `&&' defines a logic `and' for regular expressions. For example `Einstein&&Bose' will match all articles which mention Bose-Einstein condensation, or which are co-authored by Bose and Einstein. When entering the regular expression, you can complete on known citation keys. RefTeX prefers to use BibTeX database files specified with a `\bibliography' macro to collect its information. Just like BibTeX, it will search for the specified files in the current directory and along the path given in the environment variable `BIBINPUTS'. If you do not use BibTeX, but the document contains an explicit `thebibliography' environment, RefTeX will collect its information from there. Note that in this case the information presented in the selection buffer will just be a copy of relevant `\bibitem' entries, not the structured listing available with BibTeX database files. In the selection buffer, the following keys provide special commands. A summary of this information is always available from the selection process by pressing `?'. `0-9,-' Prefix argument. `a' Accept all entries in the selection buffer and create a single `\cite' macro referring to them. `A' Accept all entries in the selection buffer and create a `\cite' macro for each of it. `f' Toggle follow mode. When follow mode is active, the other window will always display the full database entry of the current article. This is equivalent to pressing after each cursor motion. With BibTeX entries, follow mode can be rather slow. `g' Start over with a new regular expression. The full database will be rescanned with the new expression (see also `r'). `n' Go to next article. `p' Go to previous article. `q' Exit the selection process without inserting a citation into the buffer. `r' Refine the current selection with another regular expression. This will *not* rescan the entire database, but just the already selected entries. `.' Show insertion point in another window. This is the point from where you called `reftex-citation'. `' Enter a citation key with completion. This may also be a key which does not yet exist. `' Show the database entry corresponding to the article at point, in another window. See also the `f' key. `' Insert a citation referencing the article at point into the buffer from which the selection process was started. `mouse-2' Clicking with mouse button 2 on a citation will accept it like would. See also variable `reftex-highlight-selection', *Note Options (Misc)::. `?' Show a summary of the available keys. In order to define additional commands for this selection process, the keymap `reftex-select-bib-map' may be used.  File: reftex, Node: Citation Styles, Next: Citation Info, Prev: Creating Citations, Up: Citations Citation Styles =============== The standard LaTeX macro `\cite' works well with numeric or simple key citations. To deal with the more complex task of author-year citations as used in many natural sciences, a variety of packages has been developed which define derived forms of the `\cite' macro. RefTeX can be configured to produce these citation macros as well by setting the variable `reftex-cite-format'. For the most commonly used packages (`natbib', `harvard', `chicago') this may be done from the menu, under `Ref->Citation Styles'. Since there are usually several macros to create the citations, executing `reftex-citation' (`C-c [') starts by prompting for the correct macro. For the Natbib style, this looks like this: SELECT A CITATION FORMAT [^M] \cite{%l} [t] \citet{%l} [T] \citet*{%l} [p] \citep{%l} [P] \citep*{%l} [e] \citep[e.g.][]{%l} [s] \citep[see][]{%l} [a] \citeauthor{%l} [A] \citeauthor*{%l} [y] \citeyear{%l} Following the most generic of these packages, `natbib', the builtin citation packages always accept the `t' key for a *textual* citation (like: `Jones et al. (1997) have shown...') as well as the `p' key for a parenthetical citation (like: `As shown earlier (Jones et al, 1997)'). To make one of these styles the default, customize the variable `reftex-cite-format' or put into `.emacs': (setq reftex-cite-format 'natbib) You can also use AUCTeX style files to automatically set the citation style based on the `usepackage' commands in a given document. *Note Style Files::, for information on how to set up the style files correctly.  File: reftex, Node: Citation Info, Next: Chapterbib and Bibunits, Prev: Citation Styles, Up: Citations Top Citation Info ============= When point is idle on the argument of a `\cite' macro, the echo area will display some information about the article cited there. Note that the information is only displayed if the echo area is not occupied by a different message. RefTeX can also display the `\bibitem' or BibTeX database entry corresponding to a `\cite' macro, or all citation locations corresponding to a `\bibitem' or BibTeX database entry. *Note Viewing Cross-References::, for more information.  File: reftex, Node: Chapterbib and Bibunits, Next: Citations Outside LaTeX, Prev: Citation Info, Up: Citations Chapterbib and Bibunits ======================= `chapterbib' and `bibunits' are two LaTeX packages which produce multiple bibliographies in a document. This is no problem for RefTeX as long as all bibliographies use the same BibTeX database files. If they do not, it is best to have each document part in a separate file (as it is required for `chapterbib' anyway). Then RefTeX will still scan the locally relevant databases correctly. If you have multiple bibliographies within a *single file*, this may or may not be the case.  File: reftex, Node: Citations Outside LaTeX, Prev: Chapterbib and Bibunits, Up: Citations Citations outside LaTeX ======================= The command `reftex-citation' can also be executed outside a LaTeX buffer. This can be useful to reference articles in the mail buffer and other documents. You should *not* enter `reftex-mode' for this, just execute the command. The list of BibTeX files will in this case be taken from the variable `reftex-default-bibliography'. Setting the variable `reftex-cite-format' to the symbol `locally' does a decent job of putting all relevant information about a citation directly into the buffer. Here is the lisp code to add the `C-c [' binding to the mail buffer. It also provides a local binding for `reftex-cite-format'. (add-hook 'mail-setup-hook (lambda () (define-key mail-mode-map "\C-c[" (lambda () (interactive) (require 'reftex) (let ((reftex-cite-format 'locally)) (reftex-citation))))))  File: reftex, Node: Viewing Cross-References, Next: RefTeXs Menu, Prev: Citations, Up: Top Viewing Cross-References ************************ RefTeX can display cross-referencing information. This means, if two document locations are linked, RefTeX can display the matching location(s) in another window. The `\label' and `\ref' macros are one way of estabishing such a link. Also, a `\cite' macro is linked to the corresponding `\bibitem' macro or a BibTeX database entry. The feature is invoked by pressing `C-c &' (`reftex-view-crossref') while point is on the KEY argument of a macro involved in cross-referencing. You can also click with `S-mouse-2' on the macro argument. Here is what will happen for individual classes of macros: `\ref' Display the corresponding label definition. All usual variants(1) of the `\ref' macro are active for cross-reference display. This works also for labels defined in an external document when the current document refers to them through the `xr' interface (*note xr (LaTeX package)::.). `\label' Display a document location which references this label. Pressing `C-c &' several times moves through the entire document and finds all locations. Not only the `\label' macro but also other macros with label arguments (as configured with `reftex-label-alist') are active for cross-reference display. `\cite' Display the corresponding BibTeX database entry or `\bibitem'. All usual variants(2) of the `\cite' macro are active for cross-reference display. `\bibitem' Display a document location which cites this article. Pressing `C-c &' several times moves through the entire document and finds all locations. BibTeX `C-c &' is also active in BibTeX buffers. All locations in a document where the database entry at point is cited will be displayed. On first use, RefTeX will prompt for a buffer which belongs to the document you want to search. Subsequent calls will use the same document, unless you break this link with a prefix argument to `C-c &'. `\index' Display other locations in the document which are marked by the same index entry. The standard `\index' macro as well as many variants(3) will be recognized. While the display of cross reference information for citations and labels is hard-coded within RefTeX, the `\index' stuff is configured in the variable `reftex-view-crossref-macros'. You can customize this variable to add other sets of macros for which the display of cross-referencing information can be useful. ---------- Footnotes ---------- (1) all macros that either start or end with `ref' (2) all macros that either start or end with `cite' (3) all macros which contain either `index' or `idx' in their name  File: reftex, Node: RefTeXs Menu, Next: Keybindings, Prev: Viewing Cross-References, Up: Top RefTeX's Menu ============= RefTeX installs a `Ref' menu in the menu bar on systems which support this. From this menu you can access all of RefTeX's commands and a few of its options. There is also a `Customize' submenu which can be used to access RefTeX's entire set of options.  File: reftex, Node: Keybindings, Next: Faces, Prev: RefTeXs Menu, Up: Top Default Keybindings =================== Here is a summary of the available keybindings. C-c = `reftex-toc' C-c ( `reftex-label' C-c ) `reftex-reference' C-c [ `reftex-citation' C-c & `reftex-view-crossref' S-mouse-2 `reftex-mouse-view-crossref' Note that the `S-mouse-2' binding is only provided if this key is not already used by some other package. RefTeX will not override an existing binding to `S-mouse-2'. The above keys were chosen to avoid interfering with AUCTeX's settings. Personally, I also bind some functions in the users `C-c' map for easier access: C-c t `reftex-toc' C-c l `reftex-label' C-c r `reftex-reference' C-c c `reftex-citation' C-c v `reftex-view-crossref' C-c s `reftex-search-document' C-c g `reftex-grep-document' If you want to copy these as well, set in your `.emacs' file: (setq reftex-extra-bindings t) Changing and adding to RefTeX's keybindings is best done in the hook `reftex-load-hook'. For information on the keymaps which should be used to add keys, see *Note Keymaps and Hooks::.